The Type B Strand Puller (P/N 68490) is designed for tensioning figure-8 cable on 1/4 in. (6-7mm) poly jacketed strand, and designed for pulling loads up to 5000 lbs. (2268kg)
Works on strand from .20 to .37 in. (5 – 9.4mm)
Serpentine grooves grip insulation on strand, preventing slippage
A safety chain permanently secured to a shackle acts as a safety tether in the event the grip disengages
The Model H Strand Puller (P/N 68491) is designed for tensioning strand sizes from 5/16 in. through 5/8 in. (9.5-12.7mm) and for pulling loads that exceed 5000 lbs. but not more than 15,000 lbs. (6818 kg)
Works on strand from .31 to .62 in. (7.8 – 15.7mm)
A safety chain permanently secured to a shackle acts as a safety tether in the event the grip disengages
The Chicago Grip for bare wire (P/N 69494) maintains temporary tension until the wire or cable can be permanently terminated.
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand.
Locking loop handles allow the jaws to be held in an open position for easy placement on wire or cable.
Lightweight, especially economical grip.
Designed for working with solid and stranded bare wire from .08 in. (2mm) to .20 in. (5.1mm).
1500 lbs. (680kg) Maximum Safe Load
Single “V” 3 in. groove jaw
Grip for High Strength Cables 0.55-Inch (P/N 68495) maintains temporary tension until the wire or cable can be permanently terminated.
Designed for cable sizes from 0.218 to 0.55-Inch (5.5 to 13.9 mm)
Double ”V” grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Max Safe Load of 8000 lb (3629 kg)
For larger conductors, see our grips with round inside-jaw contour
Klein Haven’s® Grip - Jaw Closeup
The Klein Haven’s® Grip  P/N 68493 is designed for use when light, compact grip is desired and where conductor damage is not a factor.
 Maximum cable size is 7/8 in. (22.35mm) and minimum size is 3/8 in. (9.65mm). For pulling loads up to 8000 lbs (3636kg).